Icon

Login

If you have can not remember your username or password, please contact us.
Good morning,
Login to see prices
+353 47 30650
E-mail
Notice
LogoLogo
Logo
SKU: TD111DZ

TD111DZ Makita Brushless Impact Driver

INFORMATION
TECHNICAL DETAILS

• New impact mode (A-mode): helps to eliminate "screw cam-out" and "cross threading“ by driving at low speed until the start of tightening
• Variable speed
• Electric brake
• Forward / reverse rotation
• LED job light
• Compact design with overall length of 135mm
• Brushless motor
• Ergonomic soft grip
• Two selectable Impact Modes (High/Low)
• Belt clip

• Driving Shank: 1/4" Hex • Standard Bolt: M5-M14 • High Strength Bolt: M5-M12 • Machine Screw: M4-M8 • Coarse Thread Screw: 22-90mm • No Load Speed: High:0-3,000rpm - Low:0-1,300rpm • Impacts per Minute: High: 0-3,900ipm Low: 0-1,600ipm • Max Tightening Torque: 135Nm • Noise Sound Pressure: 94.0 dB(A) • Noise Sound Power: 105.0 dB(A) • Noise K Factor: 3 dB(A) • Vibration K Factor: 1.5 m/sec² • Vibration: Fastening Bolt: 12.5 m/sec² • Net Weight: 0.97-1.1Kg • Body Only
Explore more

Related Products

FF43202 CORDLESS IMPACT DRIVER CID/200-BL 20V PLUS, SOLO, FF GROUP

SKU: FF43202

FF43202 CORDLESS IMPACT DRIVER CID/200-BL 20V PLUS, SOLO, FF GROUP

INFORMATION
PRODUCT SPECIFICATION
GENERAL FEATURES

CORDLESS IMPACT DRIVER CID/200-BL 20V PLUS, SOLO, FF GROUP

  • Rated voltage 20 V
  • Max torque 80 / 120 / 200 Nm
  • Revolutions per minute 0-1.800 min⁻¹ 0-2.100 min⁻¹ 0-2.700 min⁻¹
  • Impact rate 0-2.520 min⁻¹ 0-2.940 min⁻¹ 0-3.780 min⁻¹
  • Tool holder 1/4" Female Hex.
  • Weight 1,1 kg
  • Brushless motor
  • 1/4" hexigonal chuck
  • Switch with variable speed, quick stop
  • 3 torque control positions
  • Durable aluminum gear box
  • LED work light
  • Battery is not included

DTL061RMJ Makita Angle Impact Driver with 2x 4.0Ah batts and DC18RC charger in a Makpac case

SKU: DTL061RMJ

DTL061RMJ Makita Angle Impact Driver with 2x 4.0Ah batts and DC18RC charger in a Makpac case

INFORMATION
TECHNICAL DETAILS

• 4 pole motor.
• Keyless single sleeve hex chuck.
• Lithium-ion's 40% weight saving means 18 volt power can be obtained by a battery that weighs the same as a 12 volt Ni-MH battery.
• Lithium-ion batteries have greater life spans than their Ni-MH or Ni-Cad counterparts giving 430% greater run time.
• Large trigger.

• Driving Shank: 1/4" Hex • Machine Screw: M4-M8 • Standard Bolt: M4-M12 • High Strength Bolt: M4-M8 • Coarse Thread Screw: 22-75mm • Max Torque: 60Nm • No Load Speed: 0-2,000rpm • Impacts per Minute: 0-3,000rpm • Net Weight: 1.4-2.0Kg • Supplied with: 2 X 4.0Ah Li-ion

DTD154Z Makita Brushless Impact Driver (3-Speed)

SKU: DTD154Z

DTD154Z Makita Brushless Impact Driver (3-Speed)

INFORMATION
TECHNICAL DETAILS

? T-mode: Tightening mode for self-drilling screw
? Electronic 3-stage impact power selection (Hard/Medium/Soft)
? Brushless motor
? LED job light
? Ergonomic soft grip
? Electric brake
? Variable speed control by trigger
? Forward / reverse rotation
? Compact overall length.

• Driving Shank: 1/4" Hex (6.35mm) • Machine Screw: M4-M8 • Standard Bolt: M5-M16 • High Strength Bolt: M5-M14 • Coarse-thread Screw: 22-125mm • Impacts per Minute: 0-3,800ipm(Hi)-2,600ipm(Med)-1,100ipm(Low) • No Load Speed: 0-3,600rpm(Hi)-2,100rpm(Med)-1,100rpm(Low) • Max Tightening Torque: 175Nm • Noise Sound Pressure: 96.0 dB(A) • Noise Sound Power: 107.0 dB(A) • Noise K Factor: 3.0 dB(A) • Vibration K Factor: 1.5 m/sec² • Vibration: Fastening Bolt: 12.5 m/sec² • Weight: 1.2-1.5Kg • Body Only

TD110DWAE Makita Impact Driver with 2x 2.0Ah batts and Standard charger

SKU: TD110DWAE

TD110DWAE Makita Impact Driver with 2x 2.0Ah batts and Standard charger

INFORMATION
TECHNICAL DETAILS

• Slide type Li-ion battery
• Electric brake
• Variable speed control trigger.
• Equipped with Battery protection circuit: designed to protect the battery from damages due to over discharge, high temperature or overload current.
• Forward and reverse trigger.
• LED job light
• Ergonomic soft grip

• Chuck Size: 1/4" Hex • Standard Bolt: M5-M12 • High Tensile Bolt: M5-M10 • Coarse Thread Screw: 22-90mm • No Load Speed: 0-2,600ipm • Impacts per Minute: 0-3,500ipm • Max Tightening Torque: 110Nm • Machine Screw: M4-M8 • Noise Sound Pressure: 94.0 dB(A) • Noise Sound Power: 105.0 dB(A) • Noise K Factor: 3 dB(A) • Vibration K Factor: 1.5 m/sec² • Vibration: Fastening Bolt: 12.5 m/sec² • Net Weight: 1.0-1.2Kg • Supplied with: 2 X 2.0Ah Li-ion
Your cost price is shown on the screen when processing your purchase.
Carriage Free Orders are subject to a minimum order of €200.00 net of VAT.
Power Washers over 30Kg’s may be subject to a carriage charge of €30.00*
Orders received before 2.00pm will be dispatched for next day delivery
We offer a nationwide delivery within 48 hours maximum, from receipt of order.
Logo pattern
*Please check this with your Account Manager, before goods are dispatched.
starmap-markerhistoryexit-upcrosschevron-downwarningtext-align-left
X